diff --git a/docs/mapediting4.html b/docs/mapediting4.html index 593c881b..e555bc81 100644 --- a/docs/mapediting4.html +++ b/docs/mapediting4.html @@ -16,77 +16,106 @@

Map editing: Tips, tricks and advice

-

Size does matter!

+

Tips, tricks and advice:

+ +

Size Matters!

- Don't make fanatically huge maps. Size DOES matter in AssaultCube, as huge maps will lag players down - - not to mention, it will take forever for players to find/frag each other, in what is supposed to be a fast paced game. - Due to the restrictions of the cube engine, it is generally a bad idea to try to rebuild your favourite map A from - your favourite game B - most engines allow for larger rooms and longer lines of sight than Cube does. + Size DOES matter in AssaultCube! Don't make fanatically huge maps as they will lag players down. + Not to mention, it will take forever for players to find/frag each other, in what's supposed to be a fast paced game. + Due to the restrictions of the cube engine, it is generally a BAD idea to try and rebuild your favourite map from + a different game, as most engines allow for larger rooms and bigger lines-of-sight than the Cube engine does!

- WQD (world quads)
+

World Quads (WQD)

The WQD count can be found by typing /hidestats 0. Some figures will appear at the right of - your screen, one of them will be WQD. + your screen, one of them will be WQD...

- WQD is a good way to measure how good your map will/won't lag. Your map should ideally + WQD is a good way to measure how good your map will or won't lag. Maps should ideally average a maximum of 5000 WQD (less is better). It's okay for your map to exceed this if it's only a - little bit more in a short area. Keep in mind that lights and details will raise the wqd counts, so a rough layout - won�t really represent the final wqd values of a scene. In an empty map(layout) wich has only corridors and basic - geometry, wqd should never be above 1000. This leaves enough headroom for details, lightning and mapmodels. - - The key to a good wqd value are occluders or "solids" (f-key)- these block the view, and the engine can stop rendering - whatever is behind those. To undersand the concept, do the following: Load any of the official maps, enter edit-mode - and fly above the map. You will see occlusion at work. You can toggle it on and off using the f5 key. This - should give you a good idea about how occlusion works and where to place solid cubes while you lay out your map. - - Keep in mind, the better your map runs, the more people will want to play it. If your map looks awesome, but - can only be run on a very recent computer, people won�t play it. Many people play AC with very old computers! -

+ little bit more in a short area. Keep in mind that lights and details will raise the WQD counts, so a rough layout + won't really represent the final WQD values of a map. In an empty map (layout is the only completed part) + which only has corridors and basic geometry, WQD shouldn't be above 1000. This leaves enough overhang for details, lightning and mapmodels. +

+

+ The key to getting a good WQD count is by using occluders or "solids" (press F). These are full-sized walls + that block the view, and it allows the engine to know that it can stop rendering whatever is behind it.
+ To undersand the concept of occluding, do the following: +

+
    +
  1. + Load one of the official AssaultCube maps. +
  2. +
  3. + Enter edit-mode (Press E). +
  4. +
  5. + Fly above the map (beyond the skymap). +
  6. +
  7. + You will now see occlusion at work. The blacked out parts of the map are where solids exist, + and the engine has decided not to render past them. Parts you can see have, of course, not been occluded. +
  8. +
+

+ You can toggle occlusion on and off by using the F5 key (Warning: This may be very laggy!). + Viewing occlusion at work will give you an idea on where to place solid cubes while creating the layout for your map. +

+ Keep in mind, the better your map runs, the more people will want to play it. If your map looks awesome, but + can only be run on a decent, new computer, then people won't play it as their computer simply won't be able to + handle it. Many AssaultCube players are still using quite old hardware! +

Layout and design

-

- When creating a map, make sure not to make areas far too small. Six or more cubes wide is a good dimension for - doorways, to allow people to pass through them easily. Once again, take reality as your guide. If you�re unsure - about how large your door/window/stairs should be, look at those in your house or outside somewhere. - If players block a doorway for teammates, just because the doorway is only 4 cubes wide, people won�t like - the map very much. - - When you build your map, use more that one level. Flat maps are boring. By adding vertical variety, you also - make the gameplay more intresting. Even small alterations in floor height usually make things more diverse. - - Second floors - Due to the design of the cube engine, it�s not possible to build a second floor. You can use architectural models - to create them, but don�t try to build a 5-storey building with them. If will be impossible to make it look - right, since mapmodels are lit with one value throughout, simply the light vvalue of the cube that it sits on. - This means it will be very hard to light it up evenly, while having intresting lightning in the rest of the room. +

+ When creating a map, make sure not to make areas far too small. Six or more cubes wide is a good dimension for + doorways, to allow people to pass through them easily. Take reality as your guide. If you're unsure + about how large your door/window/stairs should be, look at those in your house or outside somewhere. + If players block a doorway for teammates, just because the doorway is only 4 cubes wide, people won't like + the map very much. +

+

+ When you build your map, use more than one level. Flat maps are boring. By adding vertical variety, you also + make the gameplay more intresting. Even small alterations in floor height usually makes things more diverse. +

+

+ Be sure that players aren't "fighting the map" too much. They should be fighting each other after all. + Also make sure that players aren't constantly bumping + their heads, especially against the skymap, as it can be annoying, and unrealistic. +

+

+ Try to keep wall sizes about 3-4 cubes thick, to allow for detail and realism. +

+

Second floors

+ Due to the limitations of the Cube engine, it's simply not possible to build a second floor out of geometry. + You can however use architectural mapmodels + to create them... but don't try to build a 5-storey building with them, otherwise it will be impossible to make it look + right, especially with lighting, since lights in the Cube engine are circular (not spherical), meaning you can't change + the lighting on each level of the platform. By creative use of levels, you can make maps that very well give the impression of multiple floors! - If you use the bridge model, use it with care! -

-

- Make sure players aren't "fighting the map" too much. They should be fighting each other after all. - Be sure to make sure that people aren't constantly bumping - their heads, especially against the skybox, as it can be annoying, and unrealistic. -

-

- Try to keep wall sizes about 3-4 cubes thick, to allow for detail and realism. -

+ If you use the bridge mapmodels, use it with care!

Textures

- Take your time in chosing them. Also, don�t just look at "how it looks", consider reality to be your guide. - Don�t put a floor texture on the ceiling, or wall textures on the floor. Although there are exeptions, try to use - Some common sense. Your nice wooden structure will probably not support a concrete roof too well, or your factory - will probably not have a wooden flooring. Brickwalls on the ground are very uncommon ... etc, etc. - - At the end of the texture list is a black/white cross sort-of texture. DON'T use it, it's not a texture, + Take your time in chosing textures. Don't just decide by "how it looks", consider reality to be your guide.
+ Don't put a floor texture on the ceiling, or wall textures on the floor (although there are exeptions). Try to use + some common sense. A nice wooden structure will probably not support a concrete roof too well, or your factory + will probably not have a wooden flooring. Brickwalls on the ground are very uncommon... etc, etc. +

+ At the end of the texture list is a texture imprinted with the words "missing content". DON'T use it, it's not a texture, in-fact, it's lack of a texture. It looks ugly and shouldn't be used in any map, because it's actually there to show if textures and skins did not load properly.

Mapmodels

- Though they can add some nice and neccesary detail to your map, don�t rely on them! It is advised to add + Though they can add some nice and neccesary detail to your map, don't heavily rely on them! It is advised to add mapmodels at a late stage in mapping. Think of them more like the icing on the cake. - A boring room won�t look better if you add lots of mapmodels. - When you add them, less is often more. If every square meter has a cigarette and a leaflet on the ground, the + A boring room won't look better if you add lots of mapmodels. + When you add them, less is often more. If every square metre has a cigarette and a leaflet on the ground, the effect will be lost.

Co-operative map editing